13 CUTTING TOOL

ID : 99556
Brand : ITT
Last Update : 02/06/2557 14:53 Preview : 3,970
Main Technical Data: Center height: 80mm Clamping diameter in V-slot: 4-30mm Travel of V-block: 25mm Transversal travel of slide: ±12.5mm Quantity of tooth: 24 Max wheel diameter: 200mm Max radius when dressing arc: Convex: R50mm Concave: R100mm
ID : 99557
Brand : ITT
Last Update : 02/06/2557 14:58 Preview : 3,848
Main Technical Data: 3 jaws chuck hole diameter:16mm Min clamping diameter:2mm Max clamping diameter:70mm ZCYQ80C Punch Former i s attached with 3 jaws which can hold workpieces quickly and conveniently.It can also adjust center of 3 jaws. It is suitalbe to be producted in batch.
ID : 99558
Brand : ITT
Last Update : 02/06/2557 15:05 Preview : 3,808
Main Technical Data: Clamping diameter: 2- 20 Supply ER32 collet size: 4,6,8,10,12,16,20. For workpiece diamete smaller than 4mm,use shank 20mm/ER16 collet chuck. It clamps workpiece quickly and steadily when processing without checking the center.
ID : 99559
Brand : ITT
Last Update : 02/06/2557 15:16 Preview : 3,775
1. Punch grinder is a tool which can be put on the surface of grinding machine for grinding punches. It can do cylindrical grinding automatically. 2. The rollers can be used to adjust the workpiece before grinding. 3. When during heavy grinding, use screw pressure for $rm holding as shown in the picture. 4. Accuracy of roller is within 0.005mm. It can grind punches of outside diameter from 1.5~30mm, extended grinding length is within 5~35mm.
ID : 99560
Brand : ITT
Last Update : 02/06/2557 15:21 Preview : 3,747
Performance and characterist: 1. It is main attchments to precision millings grinders CNCmachines it is particularly suitable for the nishing of precision parts 2. Parallelism 0.025mm/100mm,squareness 0.025mm 3. The special segment in the movable jaw forces the vertical pressure downward when the horizontal pressure works,so that this jaw does not lift the workpiece 4. For positions allow extra capacity to change opening of jaw 5. As the thrust component of the screw is equipped with thrust needle bearing if can be easily operated
ID : 99561
Brand : ITT
Last Update : 02/06/2557 13:54 Preview : 4,049
ER SERIES COLLETS WITH STANDARD DIN6499B 1. Made of special elastic steel material 2. Power clamping ability,precise accuracy 3. Used for boring,milling,drilling,tappping,grinding and engraving operation etc.
ID : 99562
Brand : ITT
Last Update : 02/06/2557 14:08 Preview : 3,424
ID : 99563
Brand : ITT
Last Update : 02/06/2557 14:32 Preview : 3,396
ID : 99564
Brand : ITT
Last Update : 02/06/2557 14:36 Preview : 3,941
ID : 99565
Brand : ITT
Last Update : 02/06/2557 14:50 Preview : 6,230
ID : 99566
Brand : ITT
Last Update : 02/06/2557 13:47 Preview : 3,509
ID : 99567
Brand : ITT
Last Update : 02/06/2557 13:52 Preview : 3,547
ID : 99568
Brand : ITT
Last Update : 21/05/2557 09:00 Preview : 3,562
ID : 99569
Brand : ITT
Last Update : 21/05/2557 09:01 Preview : 3,143
ID : 99570
Brand : ITT
Last Update : 21/05/2557 09:04 Preview : 3,239
ID : 99571
Brand : ITT
Last Update : 21/05/2557 09:09 Preview : 3,274
ID : 99572
Brand : ITT
Last Update : 21/05/2557 09:15 Preview : 3,498
ID : 99573
Brand : ITT
Last Update : 21/05/2557 09:06 Preview : 3,535
1. When order please indicate the hilt the concrete form. If needs in the center cold and the ange water leakage hilt, please mark AD/B. 2. According to needs to be possible to provide the balanced hilt, the standard precision is G6.3/12000rpm, the precise precision is G2.5/20000rpm.
ID : 99574
Brand : ITT
Last Update : 21/05/2557 09:25 Preview : 3,599
ID : 99575
Brand : ITT
Last Update : 02/06/2557 13:38 Preview : 3,491